Mallet Head

Cameron Mallet Putters, the red X and Futura Phantom ® and the limit of two Edition Cameron Models

Author: Walter Ballenberg

This article will discuss several lines of products offered by Scotty Cameron putter and Titleist. These include two lines of mallet putters, the RED series ® X and Futura Phantom, and two limited-edition putters.

RED X ® Mallet Putters

As is the case with many Scotty Cameron putters, mallet head design of this line are very sculptured look and pleasing to the eye. It is both a certain audacity in the drawings, but simple, too. One wonders if Cameron is not the sculpture on the side. The latest putters in this series, the Red X3 and X5, are simply sent to the Titleist retailers as of this writing in mid-September 2007. Both putters are machined 303 stainless steel and have a black anodized plate outsole and a durable gloss finish Carbon Mist. Cameron uses this to glare-resistant finish several of his designs putter for 2007. All mallet putters in the product line has a single alignment line. The differences between these two putters are the Red X3 has a traditional tree ¼ a tree offset curve obtained by a single shaft, and Red X5 has a full shaft offset and a necklace from plumbing. Both have the standard 4 degrees 71 degrees of loft and lie angle, and both come in lengths of 33, 34 and 35 inches. To the left, only the Red X3 is available in a length of 35 inches.

Older members of this product line are the X and Red X2, and a number of variants of the same. There are belly putters for both models, the red and half red X X2 Mid, and there is a long putter called Red X2 Long. These putters have been designed in 2003, and Cameron has done much research with various materials to achieve the best feeling and the possible impact of sound. The heads are made of stainless steel, and there is an additional face insert made of a different type of stainless steel and an elastomer insert gives the boundary that contributes to good sense and sound at impact. The difference between the X and Red X2 in the configuration tree. The red X is a single dual-axis displacement and the shaft connects to the iron head midway between the center of the hammer head and heel. No tree offset on the Red X2, and the shaft connects with a hammer, just half behind the putter head. All putters line red X retail $ 300.

Future Phantom Mallet Putters

There are two putters in this product line, the hammer and the hammer 2. The difference between the two is the tree that connects the head with a mallet until about the middle of the Mallet 2, while for the Mallet Putter shaft connects nearest heel. No trees or to offset putter. As its name suggests the product line, these putters look very elegant and futuristic them. Behind the putter face is a flat plate of stainless steel, to return with five settings line alignment. Behind is a semi-circular bar that forms the mallet putter. It is clear from simple observation of these putters that the weight was redistributed to obtain a high moment of inertia, or MOI, offering forgiveness on off-center hits. The putters come with standard loft of 4 degrees and the standard lie angle of 71 degrees, have no displacement axis and are available in lengths of 34 and 35 inches. The deck 2 only available in right hand models. The materials used to produce 661 hammers are the aircraft aluminum with a stainless steel weight to return, as mentioned above. Both putters retail for $ 300.

Limited Edition Catalina Classic

This is the classic design putter with only 2000 units produced. The putter head is made of carbon steel and is coated with anti-glare charcoal finish Mist it also increases the longevity of the putter's. There is a single line to the center rear flange and the grip is a soft stitched leather.

Ten Teryllium Edition Limited

Teryllium is a copper metal produced from 12 different alloys, and offers a soft feel and good sound, due to the insertion of copper thickness. Cameron Putters published teryllium first 10 years ago and continues with an updated version. The sleek black color combined with copper metal, forming the putter, make in a truly beautiful instrument. Hand soft sewn leather grips are standard.

The two product lines offered by Mallet Putter Cameron and Titleist, RED X ® series and future Phantom mallet putters, offers an exceptional range of choice for golfers who are sold on sticks. I used a hammer for years because I may hit solid putts on a consistent basis. For the player who has everything the two lines to provide limited edition putter only option also.

About the author:
Ballenberg Walt is a life long golfer and founder of Golf Putters, A resource site for golfers. To get a free report entitled "Making Putts Using Balanced Golf Balls over" The visit of Golf Putters

Article Source: ArticlesBase.com - title = "Cameron Mallet Putters, the Red X and Futura Phantom ® and the limit of the two models Cameron Edition "> Cameron Mallet Putters, the red X and Futura Phantom ® and the limit of two Cameron Edition Models